Release Coatingのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Release Coating(frp) - メーカー・企業と業務用製品 | イプロスものづくり

Release Coatingの製品一覧

1～30 件を表示 ／ 全 47 件

表示件数
Fluorine-based release agent reduces melt fracture, sharkskin, and mottling.

Fluorine-based release agent reduces melt fracture, sharkskin, and mottling.

Reduce troubles in extrusion molding! Just apply it to the nozzle and die! Exempt from PFAS regulations.

FluoroSurf/Mold Free, when applied to nozzles and dies, forms a fluorine-based film on the metal surface, providing slip and non-stick properties. This film adheres strongly to the metal, effectively reducing melt fracture, sharkskin, and streaking continuously. When the effectiveness diminishes, reapplication with a brush or spray will restore its performance. There is no need to remove old components. It is non-flammable, so you can use it with peace of mind. It does not contain substances subject to PFAS regulations (such as PFOS, PFOA, etc.). *Free samples are currently available. If you would like one, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • MF　正面（5095前）ピクセル変更.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Aerosol-type fluorine-based high-performance release agent "Mold Free" free of regulated substances.

Aerosol-type fluorine-based high-performance release agent "Mold Free" free of regulated substances.

Please use this as an alternative to the discontinued fluorinated release agent! You will achieve even better release properties. No regulated substances used.

A high-performance release agent with proven results in various fields, the fluorine-based release agent "Fluorosurf" has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued by other companies. Please note that this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This offer is limited to corporate clients. It cannot be used for applications involving food or medical purposes.)

  • MF　正面（5095前）ピクセル変更.jpg
  • image1 ピクセル変更.jpg
  • バナーオレンジ_300_250.jpg
  • 非転写.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-performance release agent "Continuous molding possible" "For resin and rubber" "Dry non-transfer"

High-performance release agent "Continuous molding possible" "For resin and rubber" "Dry non-transfer"

Overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in just 5 minutes after application. The film thickness is only a few nanometers, eliminating the need for cleaning of molded products. Sample available.

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. Please try it if conventional release agents do not work. PFAS-regulated substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing for continuous release even when conventional release agents fail. ■ The film thickness is just a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FluoroSurf can be applied with a brush or spray gun, while Mold-Free can be applied directly from an aerosol can. Application is completed in 10 minutes at room temperature, eliminating the need for external processing like baked fluororesin. ■ There is no accumulation of dirt on the mold, and no transfer to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

  • 離型.jpeg
  • img-rikei01.jpg
  • img-rikei03.jpg
  • MF　正面（5095前）ピクセル変更.jpg
  • Other molds
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release agent rubber molding case: Successful continuous molding that is difficult with conventional release agents.

Release agent rubber molding case: Successful continuous molding that is difficult with conventional release agents.

When conventional release agents do not work well in rubber molding, please try FluoroSurf/MoldFree. There are many successful cases of continuous molding.

"FluoroSurf / Mold Free" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. FluoroSurf, supplied as a coating liquid, can be applied with a brush or spray gun. If you prefer a convenient aerosol, please try Mold Free. By applying either product, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication restores its performance. Additionally, FloroSurf, Mold Free MF-01, and MF-5095 do not leave any release agent on the workpiece, eliminating the need for cleaning after molding. *If you would like a sample, please include "Sample Request" in your inquiry.

  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-performance release agent for carbon fiber CFRP, excellent release properties.

High-performance release agent for carbon fiber CFRP, excellent release properties.

Overwhelming continuous release properties in carbon fiber CFRP molding. Easy application with a brush or spray. Dries at room temperature in 5 minutes after application. Samples available.

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult carbon fiber (CFRP)! Please try it when conventional release agents fail. PFAS regulatory substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ Application is completed in just 10 minutes at room temperature. No external processing like baked fluororesin is required. ■ There is no accumulation of dirt on the mold, and no transfer of release agent components to the workpiece, eliminating the need for cleaning processes. ■ No cracking occurs during the release of carbon fiber sheets. ■ There is no cloudiness in the workpiece even with transparent resin molding. ■ It is non-flammable, thus not classified as hazardous under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ No removal of the film is necessary during mold reworking. ■ It is effective in reducing melt fracture and sharkskin in extrusion molding.

  • 離型.jpeg
  • img-rikei01.jpg
  • img-rikei03.jpg
  • MF　正面（5095前）ピクセル変更.jpg
  • Other molds
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release agent for preventing cracks in CFRP thin sheet molding, no cleaning of molded products required.

Release agent for preventing cracks in CFRP thin sheet molding, no cleaning of molded products required.

Demonstrates its true capabilities in thin material molding with overwhelming release properties. Easy to apply, can be applied on-site during molding, and dries at room temperature in just 5 minutes. Free of PFOA/PFOS. Non-flammable and safe.

The "FloroSurf FG-509X Series" is a release agent that forms a dry fluorine film on the surface of molds. By simply applying it with a spray gun in our manufacturing facility and allowing it to air dry at room temperature, a dry, non-stick surface is imparted to the mold. There is no need to outsource processing to specialized contractors. The film is extremely thin, allowing for excellent continuous release properties even for complex and precise shapes. Additionally, the release agent components do not transfer, so cleaning of the molded products is unnecessary. Please try it in cases where conventional release agents do not work well during CFRP molding. Furthermore, our products do not contain regulated substances such as PFOS or PFOA. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ Film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with a brush or spray gun, with air drying in just 10 minutes at room temperature. No need for external processing ■ No removal of the film is required during reapplication ■ Low odor and non-flammable. Not classified as an organic solvent, significantly reducing legal management items Applying it to the nozzle of extrusion molds can also reduce haze. *If you would like a free sample, please contact us.

  • IPROS61567518649095654966.jpeg
  • hikari_nano_20190204164512529.jpg
  • MF　正面（5095前）ピクセル変更.jpg
  • image1 ピクセル変更.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-performance continuous release agent Fluorosurf CFRP molding case study

High-performance continuous release agent Fluorosurf CFRP molding case study

Even difficult moldings that cannot be released with regular release agents can be continuously released. Additionally, there is no need for cleaning as there is no transfer to the molded product!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It proves effective in cases where conventional release agents fail to work properly. It has excellent durability, with a track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【 Case Study in Thin CFRP Molding 】 1. Background Introduction In the thin molding of carbon fiber, such as fuel cell separators, conventional release agents caused cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1000 shots became possible, and mass production was confirmed. Additionally, there is no transfer to the molded product, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • MF　正面（5095前）ピクセル変更.jpg
  • image1 ピクセル変更.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-performance continuous release agent Fluorosurf CFRP molding introduction case study

High-performance continuous release agent Fluorosurf CFRP molding introduction case study

Even difficult molding that cannot be released with regular release agents can be continuously released. On top of that, there is no need for cleaning as there is no transfer to the molded product!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents fail to work. It has outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication using a brush or spray can restore its performance. 【Case Study in Thin CFRP Molding】 1. Background Introduction In the thin molding of carbon fiber, such as separators for fuel cells, conventional release agents caused cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1,000 shots became possible, leading to the decision for mass production. Additionally, there is no transfer to the molded products, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • 【編集済み】正面（5095前）　左から01・5095・02S.jpeg
  • image1 ピクセル変更.jpg
  • IPROS90927171478246750738.jpeg
  • IPROS90788153091456049546.jpeg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
【Precision Molding Case】Successfully achieved continuous molding of shapes that are difficult with conventional release agents.

【Precision Molding Case】Successfully achieved continuous molding of shapes that are difficult with conventional release agents.

For cases where conventional release agents do not work well in molding precise surface shapes, please try Fluorosurf. There are numerous achievements in continuous molding.

"Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. By applying it, the adhesion of the surface molding resin is reduced, and a layer of fluorine compounds at the nanometer level exhibits excellent release properties even for complex and precise shapes. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case] Continuous operation by reducing the formation of flash in extrusion molding nozzles.

[Case] Continuous operation by reducing the formation of flash in extrusion molding nozzles.

Apply to the mouthpiece on-site. Simply air dry at room temperature to reduce haze. Significant improvement in productivity.

【Issue】 - Currently, mold release occurs after 5-10 minutes of continuous operation. We would like to extend this to approximately 60 minutes if possible. 【Solution Example】 By applying 'FloroSurf FG-5093' to the nozzle, continuous molding for 120 minutes becomes possible! FloroSurf FG-5093 is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Dry high-performance release agent Fluorosurf silicone-free

Dry high-performance release agent Fluorosurf silicone-free

A dry release film is formed on the surface of the mold. Release properties are significantly improved, and cleaning of the molded products is unnecessary. It is non-flammable and safe, and can be easily applied. Contains no silicone-based compounds.

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that it does not contaminate molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts exceptional durability, with proven performance for continuous release over thousands of shots, and reapplication using a brush or spray can restore its effectiveness. **Features** - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modifications. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.*

  • img-rikei03.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Water-based release agent, excellent release properties, continuous release possible with a single application, free of regulated substances.

Water-based release agent, excellent release properties, continuous release possible with a single application, free of regulated substances.

The Fluoro Surf FG-5095W is an environmentally friendly water-based release agent with excellent release properties. Please try it when conventional release agents do not work.

FloroSurf FG-5095W is a water-based fluorine release agent. It is ideal for VOC countermeasures and does not use any regulated substances such as PFOA, PFOS, or PFHxS. When applied to elastomer molds for resin molding using a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the molding resin on the surface, demonstrating excellent release properties. The release component reacts and adheres to the mold surface, providing sustained release effects and enabling continuous release. It is particularly effective in situations where conventional release agents struggle to perform. The coating is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes, resulting in less mold contamination and significantly reducing cleaning efforts.

  • MF　正面（5095前）ピクセル変更.jpg
  • 押出成形　離型剤.jpg
  • Other polymer materials
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Dry release agent Fluorosurf FG-5093 silicone-free

Dry release agent Fluorosurf FG-5093 silicone-free

A dry release film is formed on the surface of the mold. Release properties are improved, and cleaning of the molded product is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, ensuring that molded products remain clean and do not require washing. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

  • img-rikei03.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Mold surface treatment agent allows for continuous release. Easy application on-site.

Mold surface treatment agent allows for continuous release. Easy application on-site.

Please try this when you have difficulty with resin molding. It demonstrates overwhelming continuous release properties. After application in the molding area, air dry for 2 minutes at room temperature.

The "Fluoro Surf FG-509X" is a surface treatment agent that allows for fluorine processing on the surface by applying it to resin-molded molds, enabling continuous release. It can be easily applied on-site using a brush, spray gun, or wiping. After application, it dries at room temperature in just 2 minutes. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * This surface treatment bonds to the mold surface, creating a durable release film that allows for continuous release. * It can also be applied to molds that have been conventionally fluorinated, further improving release properties. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * It is non-flammable and does not contain organic solvents, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. A water-based model "FG-505W" is also available as a VOC countermeasure model. * There is no need to remove the residual film during reapplication; you can simply apply another layer. * It has good gas release properties, reduces gas staining, and improves flow. * If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Fluorine Coating Agent Example] Easy to apply and improves mold release properties.

[Fluorine Coating Agent Example] Easy to apply and improves mold release properties.

Dry fluorine-based mold release agent. Overwhelming continuous release performance. Please try it when conventional release agents do not work well. No cleaning of molded products required. Samples available.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. Additionally, it does not contain any PFAS regulated substances. With just one application, the adhesion of the surface molding resin is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

  • 離型.jpeg
  • Other molds
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Continuous release-type dry release agent for fine molding "Nanoimprint"

Continuous release-type dry release agent for fine molding "Nanoimprint"

High release properties, compatible with nano-level surface shapes and nano-imprinting "FloroSurf" - Easy application with brushes or sprays.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer coatings and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides strong release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin-walled products. ~ We are offering free samples exclusively for businesses! ~ Please select "Request Sample" via the [Contact Button] below.

  • 離型.jpeg
  • hikari_nano_20190204164512529.jpg
  • netu_nano_20190204165242558ve2.png
  • image1 ピクセル変更.jpg
  • Other molds
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Water-soluble release agent: high performance, continuous release possible, dry non-transfer, non-silicone.

Water-soluble release agent: high performance, continuous release possible, dry non-transfer, non-silicone.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using brushes or spray guns. * The release component reacts and bonds to the surface of the mold, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * By applying it to the die of extrusion molding, it can also reduce defects like orange peel and shark skin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for compliance with fire safety and occupational health regulations. * If you would like a free sample, please indicate "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • hikari_nano_20190204164512529.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release agent for transparent resin: No cloudiness during the molding of transparent resin!

Release agent for transparent resin: No cloudiness during the molding of transparent resin!

Release agent for transparent resin forms a dry release film on the mold surface. No cleaning of molded products is required. Non-flammable and safe + easy to apply. Contains no silicone compounds.

"FloroSurf" and "Mold Free" are fluorine-based dry release agents that do not cause cloudiness in transparent resins. They do not contain silicone, ensuring that molded products remain clean and do not require washing. Additionally, no PFAS regulated substances are used at all. These agents demonstrate their effectiveness in situations where traditional release agents struggle to perform. They are highly durable, with a proven track record of continuous release over thousands of shots, and their performance can be restored by reapplying with a brush or spray. There are two types available: solution type (product name FloroSurf) and aerosol type (product name Mold Free). 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking; reapplication restores release performance ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment (excluding aerosol type) *If you would like a free sample, please include "Sample Request" in your inquiry.

  • img-rikei03.jpg
  • IPROS61567518649095654966.jpeg
  • MF　正面（5095前）ピクセル変更.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
In-house fluorine surface treatment of molds - non-stick release agent FluoroSurf.

In-house fluorine surface treatment of molds - non-stick release agent FluoroSurf.

Fluorine-based dry release agent. Please try it when regular release agents do not work well. Outstanding continuous release properties. Easy to apply and dries at room temperature in 5 minutes. No cleaning of molded products required.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the die of extrusion molding can also reduce haze. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • バナー　離型剤　オレンジ_300_250.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Next-generation release agent = Fluororesin processing mold release agent Fluorosurf

Next-generation release agent = Fluororesin processing mold release agent Fluorosurf

Please try this when you can't easily release from molds processed with fluororesin. It can be easily applied on-site and dries at room temperature in just 10 minutes. It is silicone-free.

"FloroSurf FG-5090" is a fluorine-based release agent for molds. It can be easily applied and demonstrates improved release properties even in cases where it is difficult to release from fluororesin-coated molds. Fluororesin-coated molds are challenging to coat with oil-based or silicone-based release agents, but FloroSurf FG-5090 spreads uniformly on the fluororesin surface and exhibits excellent release properties. 【Features】 ■ Strongly adheres to mold materials, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ Can be easily applied with brushes or spray guns, and the application is completed in 10-15 minutes of air drying at room temperature. Outsourcing of processing is not required. ■ Low odor and non-flammable, maintaining a good environment on-site. ■ Does not contain regulated substances such as PFOS, PFOA, or PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • img-rikei03.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release agent, excellent release properties, PFOS and PFOA free, non-VOC.

Release agent, excellent release properties, PFOS and PFOA free, non-VOC.

A dry release film is formed on the surface of the mold. Release properties are significantly improved, and cleaning of the molded products is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, preventing contamination of molded products, and eliminates the need for cleaning the molded items. No regulated substances such as PFOS or PFOA are used. Additionally, it is not classified as a VOC. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts excellent durability, with proven continuous release performance over thousands of shots, and reapplication with a brush or spray can restore its effectiveness. 【Features】 - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modification. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • img-rikei03.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Please try this when regular release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using a brush or spray gun. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * Applying it to the nozzle of extrusion molds can also reduce blushing. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • hikari_nano_20190204164512529.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Water-soluble release agent, excellent release properties, continuous release with a single application, free of regulated substances.

Water-soluble release agent, excellent release properties, continuous release with a single application, free of regulated substances.

FloroSurf FG-5095W is an environmentally friendly water-soluble release agent with excellent release properties. Please try it when conventional release agents do not work.

FluoroSurf FG-5095W is a water-soluble fluorine-based release agent. It is ideal for VOC countermeasures and does not use any regulated PFAS substances such as PFOA, PFOS, or PFHxS. When applied with a brush or spray to molds for resin molding elastomers and dried at room temperature for about 10 minutes, the release component reacts and adheres to the mold surface, demonstrating excellent release properties. ◎ The durability of the release effect is outstanding, allowing for continuous release. ◎ The film is at the nanometer level, enabling accurate reproduction even for complex and precise surface shapes. It can also be used for nanoimprinting. ◎ There is minimal contamination of the mold, significantly reducing cleaning efforts. ◎ There is no transfer to the molded products, eliminating the need for a cleaning process. ◎ There is no clouding of the workpiece during transparent resin molding.

  • Other polymer materials
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Water-soluble release agent, high performance and continuous release, transparent resin without cloudiness, dry.

Water-soluble release agent, high performance and continuous release, transparent resin without cloudiness, dry.

Please try this when conventional release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily performed on the molding site using brushes or spray guns. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, faithfully reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * There is no cloudiness when molding transparent resins. * By applying it to the die of extrusion molding, it can also reduce defects like splay and sharkskin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for controls specified by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

  • IPROS61567518649095654966.jpeg
  • hikari_nano_20190204164512529.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release agent Fluorosurf for precision surfaces, for fine molding, nanoimprint.

Release agent Fluorosurf for precision surfaces, for fine molding, nanoimprint.

High release properties with nanometer-level surface shapes and compatibility with nanoimprinting "FloroSurf" - easy application with brushes or sprays.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to provide release or you want to improve continuous release properties, this is where it shines. "FloroSurf" bonds tightly to the mold surface with a nanometer-level ultra-thin film, imparting strong non-stick and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins and elastomers, and fragile thin materials. ～ We are offering free samples exclusively for corporate clients! ～ Please indicate "Sample Request" when you contact us using the button below.

  • 離型.jpeg
  • img-rikei01.jpg
  • img-rikei03.jpg
  • hikari_nano_20190204164512529.jpg
  • MF　正面（5095前）ピクセル変更.jpg
  • image1 ピクセル変更.jpg
  • Other molds
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluorine surface treatment of molds at our own site - Room temperature release agent - FluoroSurf

Fluorine surface treatment of molds at our own site - Room temperature release agent - FluoroSurf

Fluorine-based dry release agent. Please try it when conventional release agents do not work well. Overwhelming continuous release properties. Easy to apply and dries at room temperature in 5 minutes. No need to clean the molded products.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application grants a non-stick property to the mold surface. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with brushes or spray guns, with a drying time of 10 minutes at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce haze. Free samples are available for trial (limited to corporations)! Feel free to request.

  • IPROS61567518649095654966.jpeg
  • hikari_nano_20190204164512529.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Room temperature construction dry release agent Fluorine surface processing of molds at our own site

Room temperature construction dry release agent Fluorine surface processing of molds at our own site

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Easy to apply, it dries at room temperature in 5 minutes on the molding site. No need to clean the molded products.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good environment on-site By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to businesses)! Please feel free to request.

  • IPROS61567518649095654966.jpeg
  • hikari_nano_20190204164512529.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Continuous release is possible. Fluorine surface processing of molds at our own site. Non-transfer.

Continuous release is possible. Fluorine surface processing of molds at our own site. Non-transfer.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. It is easy to apply, can be applied on the molding site, and only requires 5 minutes of air drying at room temperature. No cleaning of the molded products is necessary.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano-imprinting ■ Can be easily applied with brushes or spray guns, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to corporations)! Please feel free to request.

  • IPROS61567518649095654966.jpeg
  • hikari_nano_20190204164512529.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release agent case: No transfer to the workpiece in dry conditions! Continuous release is now possible!

Release agent case: No transfer to the workpiece in dry conditions! Continuous release is now possible!

It is easy to perform release agent treatment that exceeds in-house baked fluororesin processing. Significant reduction in processing costs and lead times!

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and dried at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents fail to work properly. The film is at the nanometer level, allowing for precise reproduction even on complex and intricate surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Furthermore, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, making cleaning of molded products unnecessary ■ Low odor and non-flammable, maintaining a good working environment and easy management.

  • img-rikei03.jpg
  • IPROS61567518649095654966.jpeg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Spray release agent "Mold Free" high-performance release, free of regulated substances.

Spray release agent "Mold Free" high-performance release, free of regulated substances.

Please use this as an alternative to the discontinued fluorine-based release agents! It provides enhanced release properties. Free of regulated substances.

A high-performance fluorine-based release agent with proven results in various fields, "Fluorosurf," has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued by other companies. MF-5095 is a high-performance product that surpasses past aerosol release agents. Furthermore, this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This is limited to corporate clients. It cannot be used for applications involving food contact or medical purposes.)

  • image1 ピクセル変更.jpg
  • バナーオレンジ_300_250.jpg
  • 非転写.jpg
  • Coating Agent
  • Release Coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Release Coatingの関連カテゴリ

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.